- You must goto your assigned lab section for final checkoff. the list of students to TA is posted on the TA desk in lab. (we will also try to post them online) - You must fill out the online project survey form atleast 24hr before your lab time. you can only fill out the form once so be careful. During checkoff section 1. compile your design with a TA. The TA will record resource utilization into the check off sheet. 2. Create a directory in the your account named "student1name_student2name" 3. a) put all HDL sources needed to compile and the bitfile into the created directory b) if logiblox is used also copy the *.edf file for the module into the directory. c) if there are different version of project, create one sub directory for each version and copy all the files needed to compile each version into each directory. 4. The directory above must contain ID.TXT file with the following information names, SIDs, emails, TA name and the description of the project. Project description should be simple, for example: spec spec + linear interp spec + low lut + polyphony 5. once all the files are copied into the directory, move the directory to \\fileservice\cs150\cs150\final_check_off\"LabTime_TAName"\ 4. Run all tests with TA. The stress test file \\fileservice\cs150\cs150\test.mid