| Allegro CL version 6.2 Moderately revised from 6.1 | |||||||||
Arguments: stream center semi-major-axis semi-minor-axis semi-major-axis-angle
Draws the specified filled ellipse on stream. The ellipse is defined by the center (a position) and the two half-axes, lengths from the center to the farthest point on the edge and to the nearest point on the edge, called the semi-major-axis and the semi-minor-axis. (Technically, the major axis should be longer than the minor axis but the two arguments need not have that relationship.) Because the Windows ellipse drawer can only draw ellipses that are vertically or horizontally oriented, the semi-major-axis-angle argument must be a multiple of 90. Other values will signal an error. The argument specifies the angle between the semi-major-axis and a line parallel to the x-axis passing through the center. Angles are measured clockwise.
center should be a position (see make-position).
stream should be a cg-stream.
Contrast with erase-contents-ellipse which erases the filled ellipse from stream.
Copyright (c) 1998-2002, Franz Inc. Oakland, CA., USA. All rights reserved.
Documentation for Allegro CL version 6.2. This page has had moderate revisions compared to the 6.1 page.
Created 2002.2.26.
| Allegro CL version 6.2 Moderately revised from 6.1 | |||||||||