Lab 3

Deadline: EOL Friday, September 27th

Setup

To get the starter files for this lab, run the following command in your labs directory.

git pull starter master

If you get an error like the following:

fatal: 'starter' does not appear to be a git repository
fatal: Could not read from remote repository.

make sure to set the starter remote as follows:

git remote add starter https://github.com/61c-teach/fa19-lab-starter.git

and run the original command again.

Objectives

  • TSWBAT perform specific bit manipulations through compositions of bit operations.
  • TSW identify potential issues with dynamic memory management.

Exercise 1: Bit Operations

For this exercise, you will complete bit_ops.c by implementing the bit manipulation functions get_bit, set_bit, and flip_bit (shown below). You may only use bitwise operations such as and (&), or (|), xor (^), not (~), left shifts («), and right shifts (»). You may not use any for/while loops or conditional statements.

// Return the nth bit of x.
// Assume 0 <= n <= 31
unsigned get_bit(unsigned x, unsigned n);

// Set the nth bit of the value of x to v.
// Assume 0 <= n <= 31, and v is 0 or 1
void set_bit(unsigned *x, unsigned n, unsigned v);

// Flip the nth bit of the value of x.
// Assume 0 <= n <= 31
void flip_bit(unsigned *x, unsigned n);

ACTION ITEM: Finish implementing get_bit, set_bit, and flip_bit.

Once you complete these functions, you can compile and run your code using the following commands:

$ make bit_ops
$ ./bit_ops

This will print out the result of a few limited tests.

Exercise 2: Linear Feedback Shift Register

In this exercise, you will implement a lfsr_calculate() function to compute the next iteration of a linear feedback shift register (LFSR). Applications that use LFSRs are: Digital TV, CDMA cellphones, Ethernet, USB 3.0, and more! This function will generate pseudo-random numbers using bitwise operators. For some more background, read the Wikipedia article on Linear feedback shift registers. In lfsr.c, fill in the function lfsr_calculate() so that it does the following:

Hardware Diagram

LFSR Diagram

Explanation

  • On each call to lfsr_calculate, you will shift the contents of the register 1 bit to the right.
  • This shift is neither a logical shift or an arithmetic shift. On the left side, you will shift in a single bit equal to the Exclusive Or (XOR) of the bits originally in position 0, 2, 3, and 5.
  • The curved head-light shaped object is an XOR, which takes two inputs (a, b) and outputs a^b.
  • If you implemented lfsr_calculate() correctly, it should output all 65535 positive 16-bit integers before cycling back to the starting number.
  • Note that the leftmost bit is the MSB and the rightmost bit is the LSB.

ACTION ITEM: Implement lfsr_calculate(), compile lfsr and run it. Verify that the output looks like the following:

$ make lfsr
$ ./lfsr
My number is: 1
My number is: 5185
My number is: 38801
My number is: 52819
My number is: 21116
My number is: 54726
My number is: 26552
My number is: 46916
My number is: 41728
My number is: 26004
My number is: 62850
My number is: 40625
My number is: 647
My number is: 12837
My number is: 7043
My number is: 26003
My number is: 35845
My number is: 61398
My number is: 42863
My number is: 57133
My number is: 59156
My number is: 13312
My number is: 16285
 ... etc etc ...
Got 65535 numbers before cycling!
Congratulations! It works!

Exercise 3: Memory Management

This exercise uses vector.h, vector-test.c, and vector.c, where we provide you with a framework for implementing a variable-length array. This exercise is designed to help familiarize you with C structs and memory management in C.

ACTION ITEM: Explain why bad_vector_new() and also_bad_vector_new() are bad and fill in the functions vector_new(), vector_get(), vector_delete(), and vector_set() in vector.c so that our test code vector-test.c runs without any memory management errors.

Comments in the code describe how the functions should work. Look at the functions we’ve filled in to see how the data structures should be used. For consistency, it is assumed that all entries in the vector are 0 unless set by the user. Keep this in mind as malloc() does not zero out the memory it allocates.

For explaining why the two bad functions are incorrect, keep in mind that one of these functions will actually run correctly (assuming correctly modified vector_new, vector_set, etc.) but there may be other problems. Hint: think about memory usage.

ACTION ITEM: Test your implementation of vector_new(), vector_get(), vector_delete(), and vector_set() for both correctness and memory management (details below).

# 1) to check correctness
$ make vector-test
$ ./vector-test

# 2) to check memory management using Valgrind:
$ make vector-memcheck

All the vector-memcheck rule does is run the following valgrind command on our executable. For a review, read through Exercise 4 in Lab 1. Explain to yourself what each of the flags mean.

$ valgrind --tool=memcheck --leak-check=full --track-origins=yes [OS SPECIFIC ARGS] ./<executable>

The last line in the valgrind output is the line that will indicate at a glance if things have gone wrong. Here’s a sample output from a buggy program:

==47132== ERROR SUMMARY: 1200039 errors from 24 contexts (suppressed: 18 from 18)

If your program has errors, you can scroll up in the command line output to view details for each one. For our purposes, you can safely ignore all output that refers to suppressed errors. In a leak-free program, your output will look like this:

==44144== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 18 from 18)

Again, any number of suppressed errors is fine; they do not affect us.

Feel free to also use CGDB or add printf statements to vector.c and vector-test.c to debug your code.

Checkoff

Please submit to the Lab Autograder assignment (same as last week!).

Checkoff questions for Exercise 3:

  • Explain to your TA/AI why bad_vector_new() and also_bad_vector_new() are bad. Also, show your TA/AI the output of make vector-memcheck.